quietlooki.blogg.se - Synology drive setup over internet

#Synology drive setup over internet how to
#Synology drive setup over internet manual
#Synology drive setup over internet windows

#Synology drive setup over internet windows

Opening that control panel brings up the Windows File Service tab. This particular guide is applicable to other Synology NAS units.įrom the Synology Control Panel, there is a Win/Mac/NF section.

Synology has a nice workflow in their DSM platform that makes setting up shares very easy.Īs a quick background, we are using the Synology DS1812+which has been unboxed with its hardware exposed. NFS and CIFS are file-based and a foundation of the NAS market. NFS network shares is the Linux counterpart. In this guide we are going to focus on a CIFS (common internet file system) implementation which is commonly seen in Windows NAS environments. Some open source or command line NAS interfaces are less than friendly when one needs to setup a network share. Next, one needs to setup a network share. Having the NAS online is really the first step.

Last week we had a guide to quickly set up the Synology NAS.

#Synology drive setup over internet how to

Setting up a static IP address on Synology is a great way to ensure that your NAS is always at the same address on your network! But they can easily become a headache if you allow your router to give away the address your NAS plans to take.Continuing the series with the Synology DS1812+, today we are looking at how to set up network sharing. You now have an assigned static IP address.

You should navigate to the IP address that you just setup, where you will find your DSM login screen. If you are changing the IP address, the web server for DSM will restart and become unresponsive. Once you’ve set your static IP address, select OK. If you are not sure what your settings should be, DSM pre-populates them with what it used for the DHCP connection, so they should be correct.

#Synology drive setup over internet manual

Select “Use manual configuration”, and set your static IP address as well as the configuration. You will then see a menu where you can edit the connection properties. Select the interface to which you would like to assign a static IP address. From Control Panel, select “Network” as shown below: Network on Control Panelįrom within network settings, navigate to the tab “Network Interface” where you should see a list of your network interfaces. In order to setup a static IP address, first login to DSM and open up the Control Panel. If you do decide to change your network’s subnet, just be sure to enable DHCP first. It tends to be an issue primarily with mobile devices such as laptops, which will be connecting to many different network setups. The second case is not likely to cause an issue unless you decide to change your router’s subnet. Most routers will allow you to setup your network like this, and it is most likely under “DHCP” in your routers settings. The way that I do this is I set my router to give away addresses between 192.169.1.2-192.168.1.100, and then I set my static IP address above 192.168.1.100. To combat the first case, you should set your router never to give away the IP you will be setting.

The router has given the IP address away to another device that DSM is requesting.

There are two possible reasons why it would not be available: Static IP addresses are easy to setup, however they can cause issues if the IP address you choose is not available on the network. DHCP reservations are setup via your router and will be the subject of a future tutorial. This tutorial will show you how to do the setup through the NAS itself. There are two different ways to get a static IP address from your router: either through the NAS itself or using DHCP reservations.